Image 1 of 3
Image 2 of 3
Image 3 of 3
THE DETAILS
Everything you need to know.
-
ADA compliant by design — meets 2010 ADA Standards Section 226 and 902, not a retrofit
30-3/4" table height — 3/4" lower than the non-ADA HD for better wheelchair knee clearance
Welded 2-3/8" OD Schedule 40 steel pipe — same Heavy-Duty frame as the non-ADA 8ft HD
24" wheelchair-accessible overhang — engineered into the weld, not an afterthought
100% recycled plastic lumber — won't rot, splinter, crack, or fade
Satin black powder-coat finish — corrosion-resistant, UV-stable
30" × 48" clear floor space — meets ADA wheelchair access specification
Seats 6 adults + 1 wheelchair space — accessible end sized for one wheelchair user at a time
Zero annual maintenance — no staining, sealing, sanding, or board replacement
Pre-drilled frame — installation-ready out of the crate
Hardware included — bolt package and assembly instructions ship with the table
Surface-mount ready — concrete anchor kit sold separately for permanent installs
Portable option — heavy enough to stay put without anchoring in low-risk environments
Volume pricing available — bulk discounts for municipal, school, and government orders
Made in Grand Rapids, Michigan — American steel, American labor, American-made recycled lumber
-
Tabletop Length: 96" (8 feet)
Tabletop Width: 28-3/4"
Bench Length: 72" (6 feet) — shorter than the tabletop to create the 24" wheelchair-accessible overhang
Wheelchair Overhang: 24" extended tabletop past the end of the bench on the accessible end
Table Height: 30-3/4" — intentionally 3/4" lower than the non-ADA HD (31-1/2") to exceed the ADA 27" minimum knee clearance
Seat Height: 19-1/2"
Overall Width: 63-1/2" (including benches)
Total Weight: 288 lbs
Frame: 2-3/8" OD Schedule 40 steel pipe — same Heavy-Duty frame as the 6ft/8ft HD Picnic Table
Finish: Black powder-coated steel
Top & Seat Material: 2" × 10" recycled plastic lumber planks (minimum 95% recycled content)
Lumber Color Options: Cedar or Dark Grey
ADA Compliance: Meets 2010 ADA Standards for Accessible Design — Section 226 (Dining Surfaces) and Section 902 (Knee and Toe Clearances)
Wheelchair Floor Space: 30" × 48" clear floor space at the accessible end per ADA specification (installation-dependent)
Seating Capacity: 6 adults on the 72" bench (3 per side) plus 1 wheelchair space at the overhang end
Mounting: Portable standard; surface-mount available (anchoring hardware not included)
Hardware: Assembly hardware included; concrete anchors sold separately
Assembly: Hardware included, assembly required — bolt boards to pre-drilled frame
Warranty: 1 year standard
Shipping Class: 50 | Pallet ~340 lbs shipping weight, 98"L × 42"W × 19"H
Country of Origin: Made in Grand Rapids, Michigan, USA
Brand: Advantage Outdoor Products
Item Code: AOP-8HDRECPT.ADA
Architect & Product Resources:
-
The 8ft ADA Picnic Table is the right call anywhere ADA compliance is mandatory — which in practice means most commercial and public installations in the United States:
Municipal parks & recreation — ADA compliance required for all new public picnic areas; at least 5% of dining surfaces per ADA Section 226
Public schools & campuses — accessible outdoor learning and lunch seating, required under Title II
Rest areas & highway pull-offs — stacked compliance: DOT-friendly materials, BABA-friendly origin, ADA-compliant design
Federal, state & county facilities — BABA-compliant American steel and American labor plus ADA compliance in one product
Corporate campuses & office parks — places of public accommodation under Title III
Senior living & continuing care communities — accessible outdoor seating for residents using mobility devices
Medical facilities & VA campuses — accessible outdoor rest and recovery areas
Public libraries, civic buildings & courthouses — required accessible seating in outdoor gathering areas
Campgrounds & RV parks — at least one ADA-compliant table per accessible site
Restaurant patios & outdoor dining — Title III requires accessible dining surfaces in any new or altered dining area
-
The 8ft Heavy-Duty ADA Picnic Table is built for the projects where "ADA compliant" is not a marketing bullet — it's a legal requirement written into the spec. Every dimension on the accessible end of this table is engineered to meet the 2010 ADA Standards for Accessible Design, Section 902: 27" minimum vertical knee clearance, 9" minimum toe clearance, 30" width, and the clear floor space a wheelchair user needs to pull up, eat, and roll out without assistance.
Underneath the compliance, it's the Heavy-Duty frame — 2-3/8" OD Schedule 40 steel pipe, the same 19%-thicker-diameter tubing as the rest of the HD picnic table line. Satin black powder-coat finish that stands up to Michigan winters, rest-area salt, and coastal humidity. 100% recycled plastic lumber that won't rot, splinter, crack, or fade — no staining, no sealing, no replacement boards. This table stacks HD durability with ADA compliance in a single product, which matters for the government and institutional buyers who spec both.
One design detail worth flagging: the 8ft HD ADA sits at 30-3/4" tall — that's 3/4" lower than the standard HD at 31-1/2". We built it that way on purpose. The ADA minimum vertical knee clearance is 27", and most compliant tables stop exactly at the minimum. Dropping the table height by 3/4" gives wheelchair users more generous knee clearance than the standard requires — the kind of detail you only notice if you've actually tried to eat lunch at a picnic table in a wheelchair. Specifying the ADA table costs the same as the non-ADA HD; the design just works harder.
What you're not buying: a compromised design where the ADA end was bolted on as an afterthought. The frame is welded in one piece at our shop in Grand Rapids, Michigan. The accessible overhang is engineered into the weld, sized to the spec, and built with the same gauge steel as the rest of the frame. It arrives pre-drilled and ready to assemble — typically a one-hour install for a maintenance crew.
Bulk pricing available for municipal, school, and government projects.
The frame is welded 1-1/2" square steel tubing with a black powder-coated finish that resists rust and UV fade. The top and bench seats are 100% recycled plastic lumber in Cedar or Dark Grey — maintenance-free, sag-resistant, and built to stay outside year-round without rotting, cracking, or needing a coat of stain. The same materials we build every table in our line from, just in a different layout.
The square footprint also makes better use of space than a rectangular table in certain layouts. Under a square shelter roof, in the center of a courtyard, or arranged in a grid across a patio — the 48" square fits where a 6-foot or 8-foot rectangular table would overshoot the space or leave dead area on the sides. At 48 inches per side, it's compact enough to fit through standard doorways and gates for repositioning.
Portable by default — pick it up and move it where you need it. Pre-drilled frame with zinc hardware makes assembly straightforward. Factory-direct from our shop in Grand Rapids, Michigan.
-
Made in the USA — American steel, American labor, fabricated in Grand Rapids, Michigan
Compliance built in, not bolted on — ADA-accessible dimensions engineered into the weld
Family-owned & operated — real people, direct support, no call centers
Factory-direct pricing — no distributor markup, no middleman
Commercial-grade construction — 2-3/8" OD Schedule 40 steel pipe, 2"×10" recycled plastic lumber, same Heavy-Duty frame as the non-ADA 8ft HD
Stackable compliance — ADA + BABA + DOT-friendly materials on one spec sheet for government procurement
Color flexibility — Cedar and Dark Grey lumber standard; custom powder coat available on volume orders
Volume pricing — bulk discounts for municipalities, school districts, and government projects
-
Ships via common carrier (freight) directly from our Grand Rapids, MI warehouse — shipping cost is calculated at checkout, not included free due to size and weight. We ship to all 48 contiguous states. Local pickup available in Grand Rapids — call (616) 500-2515 or use our contact form.
Freight deliveries are curbside — you're responsible for unloading. Need a lift gate or have special delivery requirements? Contact us before it ships so we can arrange it.
Backed by a 1-year warranty. Inspect your bench within 48 hours of delivery and report any damage immediately. Returns accepted within 30 days — original packaging, unused, freight prepaid, resalable condition; a 25% restocking fee applies.
Questions? Real people answer: sales@advantageoutdoorproducts.com or 616.500.2515
The 24" accessible overhang is welded into the frame — engineered to meet 2010 ADA knee and toe clearance standards, not bolted on after the fact.
Frequently Asked Questions
-
Two things. First, the ADA version has a 24" tabletop overhang past the end of the bench that creates clear space for a wheelchair user to roll under the table. The standard 8ft HD does not. Second, the ADA table sits at 30-3/4" tall vs. 31-1/2" for the non-ADA HD — we dropped the height by 3/4" to give wheelchair users more generous knee clearance than the ADA minimum requires. Everything else is identical: the 2-3/8" OD Schedule 40 Heavy-Duty steel frame, 2"×10" recycled plastic lumber, powder-coat finish, weight class, and zero-maintenance profile. If your project has any ADA compliance requirement, you need the ADA version.
-
Under ADA Section 226.1, at least 5% of dining surfaces — but never fewer than one — must be accessible, and accessible tables must be dispersed throughout the facility rather than clustered in one area. For most small-to-medium public parks, that usually works out to one ADA table per picnic area. For larger installations, a parks planner, architect, or ADA consultant should confirm the exact count based on total tables and site layout. We're happy to walk through a site plan with you if it helps.
-
24 inches. The 96" tabletop extends 24" past the end of the 72" bench on the accessible end, creating the clear roll-under space a wheelchair user needs to approach the table. Combined with the 30-3/4" table height (vs. the 27" ADA minimum for vertical knee clearance) and the 19-1/2" seat height, the ADA end gives wheelchair users a comfortably sized eating space — not just the bare minimum the spec requires.
-
Yes — it's milled from 100% recycled post-consumer and post-industrial plastic, with a minimum 95% recycled content. The lumber won't rot, splinter, crack, or fade. There's no staining, sealing, or sanding to deal with. The color runs the full thickness of the plank, so scratches don't show a different color underneath. It's the same material specified by parks departments and DOT projects across the country because it outlasts wood by decades.
-
Yes. The 8ft Heavy-Duty ADA Picnic Table meets the 2010 ADA Standards for Accessible Design — specifically Section 226 (Dining Surfaces and Work Surfaces) and Section 902 (Knee and Toe Clearances). The accessible end provides a 24" tabletop overhang past the bench, a 30-3/4" table height that gives wheelchair users more than the 27" minimum vertical knee clearance required, and the 30" × 48" clear floor space needed to approach, use, and leave the table. Installation on a stable, firm, slip-resistant surface that connects to an accessible route is the responsibility of the installer — the table itself meets the product-level requirements.
-
Not necessarily. The table is heavy enough to stay put in most low-risk environments without anchoring. For permanent installations, high-traffic public sites, or any location where liability is a concern, we recommend surface-mounting with a concrete anchor kit (sold separately). ADA accessibility does require that the table be on a stable, firm, slip-resistant surface — a poured concrete pad or properly compacted aggregate is the most common approach.
-
Yes. The steel is American-sourced and American-fabricated in Grand Rapids, Michigan. The recycled plastic lumber is American-made. The table is eligible for projects subject to the Build America, Buy America Act (BABA), and we can provide country-of-origin documentation on request. For federally funded park, school, rest area, or VA facility projects, the 8ft HD ADA Picnic Table stacks BABA + ADA compliance in a single product.
-
Cedar and Dark Grey are the standard recycled plastic lumber colors — both held in stock and ready to ship inside the 14-day lead time. Custom powder-coat frame colors and custom lumber colors are available on volume orders (typically 10+ tables). If you're matching an existing parks palette or school colors, send us the spec and we'll confirm availability.
-
Essentially none. No staining, sealing, sanding, or board replacement — ever. An occasional rinse with a garden hose is all the maintenance the recycled plastic top and powder-coat frame need. The upgraded steel frame requires no additional maintenance beyond the same occasional rinse.
Further Reading: How to Choose a Commercial Picnic Table →
Browse all commercial picnic tables →
