Designed for Landscapes of all types
ADA Picnic Tables
ADA Picnic Tables Built for Public Facilities
If your facility has a picnic area, at least 5% of its tables — and never fewer than one — have to be wheelchair accessible. Most standard commercial tables don't qualify, and the reason is almost always the same: bench seating that runs the full perimeter leaves no open side for a wheelchair to pull up to the table surface.
What ADA compliance actually requires
Surface height between 28" and 34" from the ground
Knee clearance of at least 27" high, 30" wide, and 19" deep
Toe clearance of at least 9" high and 17" deep
An accessible route to the table — not just an accessible table
Getting those four right is the difference between a table that passes inspection and one that gets replaced. Our ADA Requirements for Outdoor Picnic Tables guide walks through each one, including how the 5% count works across multiple picnic areas.
Specced for parks, schools, and campgrounds
Recycled plastic lumber tops and seats that won't rot, splinter, or need sealing, on welded steel frames built for public use. Two of our three ADA tables are portable — relocate them when a space gets reconfigured without losing compliance, which most accessible seating can't do once it's set in concrete. Welded and assembled in Grand Rapids, Michigan. Family-owned since 2018, factory-direct, no distributor markup.
Need ADA tables for a project? Request a Quote →
Frequently Asked Questions
-
The 2010 ADA Standards set four measurements. Surface height must be between 28 and 34 inches from the ground. Knee clearance must be at least 27 inches high, 30 inches wide, and 19 inches deep. Toe clearance must be at least 9 inches high and 17 inches deep. And the table has to sit on an accessible route — a compliant table at the end of a gravel path is still not accessible.
Getting all four right is what separates a table that passes inspection from one that doesn't.
-
An open side. Most standard commercial tables run bench seating around the full perimeter, which leaves nowhere for a wheelchair to pull up to the table surface. An ADA-compliant table shortens or removes a bench on at least one side and keeps the required knee and toe clearance underneath that opening.
We offer three: the 48" Square in its ADA Compliant model, which removes one of its four benches; the 6ft ADA Cambridge, with a 36-inch bench on one side and a full 72-inch bench opposite; and the 8ft HD ADA, with a 24-inch wheelchair overhang and the clearances built into the weld.
-
At least 5% of the tables in each picnic area, and never fewer than one. The 5% applies per distinct area, not per property — a park with tables at a pavilion, a playground, and a trailhead needs accessible seating at all three, not five percent of the total spread across one of them.
-
The 48" Square ADA model seats 6 — two per bench across three benches — with the fourth side left open for wheelchair access. The 6ft ADA Cambridge seats 4 adults plus a wheelchair space. The 8ft HD ADA seats 6 adults plus a wheelchair space at the accessible end. All three put wheelchair users at the same surface as everyone else rather than at a separate add-on section.
-
Two of the three are portable. The 48" Square and the 8ft HD ADA both sit freely on a prepared surface and can be moved — useful when a facility reconfigures an area seasonally and still needs to stay compliant. The 6ft ADA Cambridge is surface-mount, bolting to an existing concrete pad.
The accessible route requirement applies either way: the table needs a firm, stable, slip-resistant surface leading to it, so a pad or paved area is usually part of the plan regardless of mount type.
-
Welded steel frame with recycled plastic lumber tops and benches. The lumber won't rot, splinter, or need sealing, which matters on a table that has to stay compliant for years — a splintered or sagging board can put a surface out of spec. Available in Cedar or Dark Grey. Welded and assembled in Grand Rapids, Michigan.
Shop Wheelchair-Accessible Picnic Tables
Both tables meet ADA clearance requirements with an open end for direct wheelchair access. The Cambridge is surface-mount for permanent installations; the HD Rectangular is portable and built on a 2-3/8" Schedule 40 frame for heavy public use.
The ADA-Compliant Pick When Accessibility Is Required, Not Optional.
The 6ft ADA Cambridge Picnic Table is built for sites where wheelchair accessibility is a code requirement, not a preference. Same heavy-duty Cambridge construction — 2-1/2" OD square steel tubing, recycled plastic lumber — but with a 36" shortened bench on one side for wheelchair clearance and a full 72" bench on the opposite side. Seats 4 ambulatory adults plus a wheelchair user at the same table. Welded and assembled in Grand Rapids, Michigan. Cedar or Dark Grey lumber. Surface-mount installation on a concrete pad.
📦 VOLUME PRICING AVAILABLE Need 10+ tables for your project? Request for Quote
ADA Compliant Heavy-Duty Picnic Table - 8ft
This 8ft HD ADA Picnic Table is built for commercial use that has to meet ADA compliance without giving up any of the durability you expect from a heavy-duty table. Welded 2-3/8" OD Schedule 40 steel frame, recycled plastic lumber, and a 24" wheelchair-accessible overhang engineered to meet the 2010 ADA Standards — Section 902 knee and toe clearances built into the weld, not bolted on afterward.
Welded and assembled in Grand Rapids, Michigan. Available in Cedar or Dark Grey. Seats 6 adults plus a wheelchair space at the accessible end. Fully portable — relocate it seasonally without losing compliance. Bolt package and assembly instructions included.
📦 VOLUME PRICING AVAILABLE Need multiple tables for your project? Request for Quote
Eight adults, face-to-face, around a 48" x 48" square top. Four 36" bench seats — one per side — turn this into the kind of table people actually sit at together, not just next to each other. Built for campgrounds, park pavilions, courtyards, and break areas where a rectangular table doesn't fit the space or the conversation.
Welded 1-1/2" square steel tube frame, black powder coat. Recycled plastic lumber top and seats in Cedar or Dark Grey — maintenance-free, sag-resistant, and built to stay outside permanently without rotting, splintering, or warping. Welded and assembled in Grand Rapids, Michigan with American steel and American-made materials.
Fully portable — move it wherever the group is. Pre-drilled frame with zinc hardware included for easy assembly. Factory-direct pricing.
Outfitting a larger site? Our line also includes rectangular picnic tables, commercial park benches, and bike racks — all welded steel, factory-direct.
Need wheelchair access? Select the ADA Compliant model under Model — it removes one bench to open one side of the table.
📦 VOLUME PRICING AVAILABLE Need multiple tables for your project? Request for Quote
