Commercial Picnic Tables
Heavy-Duty Picnic Tables
Steel Frames | Eco-Friendly Lumber
Shop our selection of commercial-grade outdoor picnic tables. Built in Grand Rapids, Michigan from American steel and 100% recycled plastic lumber — powder-coated frames and maintenance-free tops that won't rot, splinter, or need sealing. Advantage picnic tables serve campgrounds, schools, municipalities, retail sites, and community spaces where furniture has to survive daily public use. ADA-compliant models available. Factory-direct pricing, no distributor markup.
Frequently purchased alongside our commercial park benches and commercial bike racks for complete park, school, and campus installations.
WHICH PICNIC TABLE IS RIGHT FOR YOUR SITE?
Three frame families. Standard round tube for everyday park and campground use, Cambridge pedestal tables for permanent installs, and heavy-duty 2-3/8" pipe for the highest-traffic sites. Every table is welded in Grand Rapids, Michigan, topped with recycled plastic lumber, and finished in powder coat.
-
Standard-duty steel tube frames with recycled plastic lumber tops and seats — 2" round tube on the rectangular tables, 1-1/2" square tube on the 48" Square. The traditional commercial picnic table, portable by default.
4FT STEEL FRAME PICNIC TABLE →
Best for tight sites, small pavilions, and courtyards.Length: 48"
Seats: 4
Frame: 2" round steel tube
Top and Seats: Recycled plastic lumber
Mount: Portable, surface mount optional
6FT STEEL FRAME PICNIC TABLE →
Best for parks, campgrounds, and school grounds.Length: 72"
Seats: 6
Frame: 2" round steel tube, two-leg
Top and Seats: Recycled plastic lumber
Mount: Portable, surface mount optional
8FT STEEL FRAME PICNIC TABLE →
Best for group sites, pavilions, and high-capacity seating.Length: 96"
Seats: 8
Frame: 2" round steel tube, three-leg
Top and Seats: Recycled plastic lumber
Mount: Portable, surface mount optional
48" SQUARE PICNIC TABLE →
Best for campgrounds, courtyards, and break areas where everyone should face each other.Top: 48" x 48"
Seats: 8 — four 36" bench seats, one per side
Frame: 1-1/2" square steel tube
Height: 30-3/4" table, 18-3/4" seat
Mount: Portable, surface mount optional
-
Pedestal-style tables on 2-1/2" square steel posts. Cambridge tables anchor to the ground — they are not a portable option. Choose these when the table stays put.
6FT CAMBRIDGE PICNIC TABLE →
Best for malls, plazas, corporate campuses, and streetscapes.Top: 72" x 29"
Seats: 6 — two 72" bench seats
Frame: 2-1/2" square steel tube
Height: 31" table, 19" seat
Mount: Surface, 6" x 6" mounting feet
6FT ADA CAMBRIDGE PICNIC TABLE →
Best for public facilities and any site with ADA seating requirements.Top: 72" x 29"
Seats: ADA accessible, open-end wheelchair access
Frame: 2-1/2" square steel tube
Height: 31" table, 19" seat
Mount: Surface, 6" x 6" mounting feet
-
2-3/8" OD schedule 40 pipe — the heaviest frame we build, with 2" x 10" recycled plastic planks. For sites that take constant public use.
6FT HD PICNIC TABLE →
Best for parks, rest areas, and standard public seating.Length: 72"
Seats: 6
Frame: 2-3/8" OD schedule 40 pipe
Top and seats: 2" x 10" recycled plastic planks
Height: 31-1/2" table, 19-1/2" seat
Mount: Portable, surface mount optional
8FT HD PICNIC TABLE →
Best for group sites, pavilions, and high-capacity seating.Length: 96"
Seats: 8
Frame: 2-3/8" OD schedule 40 pipe
Top and seats: 2" x 10" recycled plastic planks
Height: 31-1/2" table, 19-1/2" seat
Mount: Portable, surface mount optional
Best for parks and public facilities needing ADA seating in a heavy-duty frame.
Length: 96" top with 24" wheelchair overhang, 72" seats
Seats: 6 plus wheelchair space
Frame: 2-3/8" OD schedule 40 pipe
Top and seats: 2" x 10" recycled plastic planks
Height: 30-3/4" table, 19-1/2" seat
Mount: Portable, surface mount optional
WHY CHOOSE ADVANTAGE PICNIC TABLES?
✓ MADE IN USA - Welded and assembled in Grand Rapids, Michigan with American materials
✓ ADA COMPLIANT OPTIONS - Wheelchair-accessible models available with 24" overhang
✓ RECYCLED PLASTIC TOPS - Eco-friendly lumber that won't rot, splinter, or crack
✓ HEAVY-DUTY STEEL FRAMES - MIG-welded construction with powder-coated finish
✓ MULTIPLE SIZES - 4ft, 6ft, and 8ft options to fit any space
✓ LOW MAINTENANCE - No painting, staining, or rotting like traditional wood
✓ FACTORY-DIRECT PRICING - No distributor markup — you buy direct from the source
IDEAL FOR:
Schools & Campuses
Parks & Campgrounds
Office Buildings
Community Centers
Apartment Complexes
Rest Areas
Recreational Facilities
FREQUENTLY ASKED QUESTIONS
-
The right size depends on your available space and expected usage. Our 4ft tables work well for smaller patios or intimate settings, seating 4 people comfortably. 6ft tables are the most popular choice for schools, parks, and break areas, seating 6-8 people. 8ft tables maximize seating capacity for high-traffic areas like campgrounds and community centers, accommodating 8-10 people. For wheelchair accessibility, our ADA-compliant tables feature a 24" overhang on one end.
-
Using the industry standard of 18" of seat space per person:
4 Foot Table: 4 people (or 3 + 1 wheelchair for ADA)
6 Foot Table: 6-8 people (or 5-7 + 1 wheelchair for ADA)
8 Foot Table: 8-10 people (or 7-9 + 1 wheelchair for ADA)
-
Yes! We offer ADA-compliant picnic tables that meet federal accessibility guidelines. Our ADA models feature a 24-inch tabletop overhang that extends past the bench on one end, providing proper wheelchair clearance. The table height falls within the required 28-34 inch range, and there is at least 27 inches of knee clearance underneath. Note that ADA requirements may vary slightly by state, so we recommend confirming your local specifications.
-
According to ADA guidelines, if your tables are fixed (surface-mounted or in-ground), at least 5% of tables or a minimum of one must be wheelchair accessible. This applies to each distinct area where picnic tables are located. For example, if you have 20 tables in a park pavilion, at least one must be ADA-compliant. Accessible tables must also be located on an accessible route with 36 inches of clearance surrounding the table.
-
Yes! We offer volume discounts for schools, parks, commercial facilities, and large orders. Contact us for a custom quote.
-
Surface Mount: The table frame is bolted directly to an existing concrete pad or hard surface using anchor bolts. This is ideal when you have existing concrete and want the flexibility to relocate tables in the future. Installation requires drilling into the concrete surface.
In-Ground Mount: The table legs are embedded directly into the ground with concrete footings, typically 18-24 inches deep. This provides maximum stability and theft deterrence, making it the preferred choice for parks, campgrounds, and public spaces where security is a priority.
-
Choose Surface Mount if: You have an existing concrete patio or pad, may want to rearrange tables seasonally, or need easier maintenance access.
Choose In-Ground Mount if: You need maximum security against theft or vandalism, the tables will be in grass or unpaved areas, or you want a permanent installation that won't shift over time.
-
Our commercial picnic tables combine two durable materials: Heavy-duty steel frames (welded construction with powder-coated finish) and 100% recycled plastic lumber for the tabletops and seats. This combination provides industrial-grade strength while being environmentally responsible and virtually maintenance-free.
-
Recycled plastic lumber offers significant advantages over traditional wood for commercial applications:
• No painting, staining, or sealing required
• Won't rot, splinter, crack, or warp
• Resistant to insects, moisture, and UV fading
• Environmentally friendly (made from recycled materials)
• Lower total cost of ownership over the table's lifetime
-
Yes, we ship throughout the continental United States. Shipping costs vary based on quantity and destination. Our Grand Rapids, Michigan location provides efficient shipping access to both coasts and everywhere in between.
COMMERCIAL PICNIC TABLES FOR TODAY’S FACILITIES
Advantage Outdoor Products is a family-owned & operated company specializing in supplying and manufacturing of commercial outdoor furnishings for public spaces of all types. Our steadfast team focuses on creating high-quality, functional and economical commercial picnic tables intended to provide the most value for your money compared to similar items. We currently offer a couple picnic table styles, both featuring superior structural frames and 100% recycled plastic slats designed to withstand constant wear and tear. These picnic tables are available in surface mount or in-ground mount options and come standard in a Satin Black powder coat finish. Each picnic table includes assembly instructions to ensure proper and secure in-ground and surface mounts.
Compact 4ft Steel Frame Picnic Table
The 4ft picnic table is built for spaces where a full-size table is too much — campgrounds, cabin rentals, RV parks, small patios, and break areas. Heavy-duty welded steel frame with 100% recycled plastic boards in Cedar or Dark Grey. Same construction as our full-size commercial picnic tables — just shorter and easier to fit in tight layouts.
At 4 feet long it seats up to 4 adults comfortably, making it a popular choice for campsite pads, glamping setups, tailgating, and small outdoor dining areas. The recycled plastic boards are maintenance-free, sag-resistant, and won't splinter or rot like wood. Satin black powder-coated steel frame resists corrosion season after season. Welded, packed, and shipped from Grand Rapids, Michigan.
Pre-drilled frame with assembly hardware included for easy setup. Factory-direct pricing.
Outfitting a larger site? We also offer commercial park benches and bike racks — all welded steel, factory-direct. Request a Quote for volume pricing.